Adjustable Shower Bracing Bars Installation Method




The installation of Adjustable Shower Bracing Bars is a little more complicated than ordinary showers, because this type of shower has one more lift bar than ordinary showers.

Wholesale Adjustable Shower Bracing Bars

1. Before installation, it is necessary to determine the position of the hole for installing the shower head, and the determination of the installation position requires a reasonable calculation according to the position of the mixing valve and the lifting rod and the user's own needs. The ruler accurately measures and marks the position of the installation hole. In the calculation process, the usage habits of household users must be considered to ensure that the shower after installation is easy to use.
2. After determining the position of the installation hole of the lift shower, it is necessary to perform the drilling operation. Use the drilling machine to align the mark to drill the hole. After the hole is drilled, install an S-shaped joint into the hole. If the water pipe leaks during use, it is necessary to tie more than 30 turns of tape at the joint. After the following work is completed, the lifting seat and the eccentric can be installed.
3. Take out the shower faucet to be installed, put on the nut, butt on the S-type joint installed in the second step, and fully tighten the nut.