Noticias

Advantages and disadvantages of swimming pool installation frameless glass door

2022-09-20

Observaciones:


Frameless glass door installation - Adjust the width of the glass partition wall and the limit groove at the top of the door to be 2~4mm larger than the glass thickness, and the groove depth should be between 20~30mm for glue injection. The installation method can be drawn from the center line of the two metal decorative panels, and then install the limit groove on the top of the door frame according to the side lines. The wooden backing plate in the slot is to adjust the slot depth. Adjust by increasing or decreasing the backing plate. Frameless glass door installation - install the rigid door frame and nail the door frame square wood according to the center line, and then use plywood to determine the size and position of the door frame column (note that the size of the decorative surface should be deducted).

Pool Gate Fittings Wholesale Price

Finally, outsource the metal decorative surface, and place the decorative surface head seam in the middle of the two sides of the installation glass when wrapping. Seam locations must be accurate and vertical. Frameless glass door installation - use a glass suction cup (or glass suction cup machine) for glass installation to suck the thick glass tightly, then hold the suction cup with 2 to 3 people to lift and erect the thick glass plate and move it to the installation site for preparation in place.