Tecnologio

NUESTRA TECNOLOGÍA


La ventaja es la funcionalidad avanzada, el control preciso, la velocidad de producción rápida, el bajo consumo de energía... Por eso podemos proporcionar la calidad perfecta y el mejor servicio. Además, con estas tecnologías de producción avanzadas, proporcionamos más valor a todos los clientes en todo el mundo.

TECHNOLOGY
New tapping recovery function saves tools and workpieces
TECHNOLOGY
The wireless intuitive probe system (WIPS) guides the operator through a simple template during setup.WIPS can define workpiece offset coordinates, set tool length offset, and monitor during machining.
TECHNOLOGY
The tool center air option can supply high pressure/high flow air from the inside of the cutter to the cutting edge, making it ideal for dry cutting and machining applications or materials where coolant is not available.
TECHNOLOGY
The tool center air option can supply high pressure/high flow air from the inside of the cutter to the cutting edge, making it ideal for dry cutting and machining applications or materials where coolant is not available.
TECHNOLOGY
The oil mist purifying system can keep no smoke and fog inside the machine during the processing, improve the visibility, reduce the cooling fluid consumption and speed up the workpiece replacement.The oil mist purification system can be conveniently installed on the sheet metal of the machine tool and powered by the machine tool
TECHNOLOGY
The new fuel-saving lubrication (MQL) system provides a steady stream of compressed air, injecting a small amount of lubricating oil directly into the cutting tool or tap to reduce heat, remove chips and provide lubrication.A little oil is just the right amount to use.This extends the tool life and, in some cases, can be operated without coolant.
TECHNOLOGY
High pressure cooling (HPC) provides cooling fluid as needed to improve machine performance, thereby increasing economic benefits.HPC means faster feed rate and better drilling operation, thus shortening cycle time and improving part quality.
TECHNOLOGY
The automatic cutter probe option is simple and easy to use. It is an efficient way to set and check tool offset and tool wear.
TECHNOLOGY
Rotary table to meet the majority of users to speed up the urgent need of the workpiece processing speed, roller CAM design, fast indexing speed, short cycle time.